Temperature Summary Report

Temperature Summary Report

This report focuses on the temperature stability of the equipment being monitored during two distinct periods of the day; namely: 
  1. Day range - During operating hours, from 8.00 to 18.00, when more fluctuations in temperature measurements are expected due to equipment being opened and people entering the premises; and
  2. Night range - At night, from 18.00 until 8.00, when external influences should not have an impact on the steadiness of the temperature of the equipment.
There are two report formats:
  1. The Daily Temperature Summary Report – Enables a report to be generated for a period of one to several days.
  2. Single Day Temperature Summary Report – Enables a report to be printed for a day and defaults to the most recent day. 


Generate the report

The report highlights the highest and lowest temperature for the day range and night range.
Readings that exceed the upper temperature limit are shown in red and readings below the temperature lower limit are shown in blue.




To generate a report, select the following information from the drop-down menus on the task bar on the right-hand side of the screen:
  1. Select the Site from the drop-down menu.
  2. Select the Equipment Group from the drop-down menu.
  3. Select the Equipment from the drop-down menu.
  4. Enter the applicable date period or single date (depending on the report in use)
  5. Select the Signatory of the report from the drop-down menu.
  6. Click Preview
Once the report is generated, it may be printed or saved.

All done!



    • Related Articles

    • Review the data

      Aim: To use the chart and table to quickly review monitoiring data for continuous improvement. Three views of the temperature monitoring data The BrightSentinel Cloud provides 3 views: The Missions view, the Alerts view and the Details view. Missions ...