Interpret the status of the AnnoLog logger

Aim: To understand the transmission and activity status of the AnnoLog logger at a glance.

When you access the Download and Configure pages of the BrightSentinel app, you are presented with two sets of indicators for each logger.

Transmission status

The top status indicates whether an AnnoLog is within Bluetooth range.

1. Found (green) - The logger is in range and is able to communicate with the Bluetooth on your phone.
   

            

1. Not Found (grey) - The logger is not within range or is inside a container that blocks Bluetooth communication.

            

Activity status

The bottom status indicates the activity status of the AnnoLog.

1. New (blue) - A new AnnoLog is registered to your account but has not been configured yet.
2. Awaiting start (yellow) - The AnnoLog has already been configured with a start delay and has not started collecting data yet. E.g.: The configured start time is 09:00 and it is only 08:57.
   
3. Running (yellow) - The AnnoLog is currently running and collecting data.
   
4. Not running - (grey) - The previous configuration has ended and the data was downloaded. The device is ready to be configured again. 
5. Ended (yellow) - The AnnoLog has completed its  set configuration period but the data has not yet been downloaded. 
   
6. Recently downloaded (grey) - The AnnoLog is running (i.e.: configured and active) and has no new data to download as it was very recently downloaded (i.e.: within its set interval period). 
   
7. Expired (red) - The subscription period for the AnnoLog has expired but it remains to have its latest data downloaded.
   

Once the AnnoLog has expired and there is no outstanding data to be downloaded, it is no longer presented in the mobile app.

That's it!

• Related Articles

• View the status of an AnnoLog logger

  Aim: To locate or check the status of an AnnoLog Log in to the BrightSentinel mobile app Tap on Configure from the menu Select the Site In the Configure page, depending on your role in the BrightSentinel system, you may have access to several Sites ...

• Configure the AnnoLog logger

  Aim: Prepare an AnnoLog logger to start its temperature monitoring. Log into the BrightSentinel app. Tap on Configure from the menu The AnnoLogs with an "Active" status in your account, in the Devices section in the BrightSentinel Cloud, are visible ...

• Download data from the AnnoLog logger

  Aim: To download data from the AnnoLog for a status update. Log into the BrightSentinel mobile app. Tap on Download from the menu. Select the Site Depending on your role in the BrightSentinel system, you may have access to several Sites in your ...

• View alert details of equipment

  Aim: To view a summary of the temperature monitoring status of Equipment currently monitored with AnnoLogs. Log into the BrightSentinel mobile app. Tap on Alerts from the menu. Select the Site Depending on your role in the BrightSentinel system, you ...

• About the BrightSentinel mobile app

  Click on About to access the most update version of our: Terms of Use. Privacy Policy. Release version of the mobile app. Status of the iOS and Andriod versions supported by the app.